WHY DO BMX BIKES MAKE NOISE Always – 10 Simple Reasons and Solutions in 2023

WHY DO BMX BIKES MAKE NOISE Always

Why do BMX bikes make noise? As BMX is now popularly known as the sport of stunts and tricks, due to their durability and ruggedness. Riders enjoy a lot and impress others by performing difficult stunts but this excitement becomes upset when you usually notice that your BMX is making noise.

But the question is why do BMX bikes make noise? BMX bikes make noise could be a result of multiple reasons as the bike is an interconnected system of different components. Usually, BMX bikes are used in off-road racing, jumping, and freestyle riding which results in creating sound.

You don’t need to be worried about why my BMX bike makes noise because it is common for BMX bikes usually make noise. There are multiple ways to fix it. 

In this article, we will bring out multiple reasons why BMX bikes make noise and solutions for how to get rid of them, which we find in our research.

Why do BMX bikes make noise?

Why do BMX bikes make noise? BMX bikes make annoying noise due to multiple reasons for which you need to regularly check and maintain your bike. Some riders intentionally want to create sound out of their bikes while performing stunts by hitting the ground, riding on pols, and getting some speed to perform the trick. 

We can’t do anything with the sounds that were produced intentionally but we could figure out those annoying noises that are produced unintentionally from the BMX bike. You can also know how fast can a BMX bike go.

We tried harder to find the reasons why BMX bikes make noise and their solutions, which are thoroughly discussed in the below section.

Reasons and solutions why do BMX Bikes make noise

Unlike traditional bicycles why do BMX bikes make noise, BMX bikes could also produce annoying sounds. This might be frustrating for both the riders and the surrounding people.

However, we identified 10 multiple reasons and possible solutions why do BMX bikes make noise. Let’s study each of them one by one.

1. Loose or damaged component:

The most common and simple reason why do BMX bikes make noise is when components are loose or damaged. Pedals can be loose, handlebars may be damaged, or even the chain itself may be loose.

Solution: To fix this issue you need to check and figure out which component is loose, so do tight that component and which part is damaged that needs to be replaced.

2. Worn-out brakes:

The second reason for noisy BMX bikes could be worn-out brakes. As in this multiple stunts sport you need to apply brakes most of the time while performing a particular stunt or trick. Using your brakes a lot can cause a scraping or grinding noise when brakes are applied. 

Solution: To fix this issue you simply need to replace the worn-out brakes.

3. Poorly maintained chain:

The third reason for your BMX bike to be noisy is that you poorly maintained your bike chain. 

In BMX most of the time riders do off-racing and due to that chains become dirty and coated with grime and dust. Which can cause the bike to make noise.

Solution: To fix this issue you simply need to regularly check your bike chain. Try to maintain a clean and lubricated bike chain.

4. Worn-out Bearings:

The fourth common reason for your BMX bike to be noisy is that your BMX bike bearings may be worn out.

This is particularly common for bearings in wheels, pedals, and other components to become worn out with time. The worn-out bearings can cause the BMX bike to make annoying noises. 

Solution: To fix this issue simply replace the worn-out bearings with new ones.

5. Tire pressure:

The fifth common reason for your BMX bike to be noisy is that you fill the tire with incorrect pressure.

Tires filled with over limit can give you an uncomfortable and noisy ride. The same goes for underinflated tires, making the ride soft and spongy as well as noisy.

Solution: To fix this issue you need to monitor your tire pressure and adjust it accordingly.

6. Loose bolts and screws:

The sixth common reason for noisy BMX bikes could be that your bikes have loose bolts and screws.

Due to Loose bolts and screws, your BMX bike can vibrate and give you a ride making a lot of noise which can irritate the public and rider.

Solution: To fix this issue you need to regularly check your BMX bike and where you find loose bolts and screws try to tighten them immediately.

7. Loose Handlebar:

The seventh common reason for your BMX bike to be noisy is that your bike handlebar is not properly tightened. 

Your BMX bike can create noise when you start riding it because your bike handlebar is loose.

Solution: To fix this issue you need to properly observe your bike handlebar and if found loose and needs to be tight then tight it.

8. Shabby Pedals:

The eighth common reason for noisy BMX bikes could be that the pedals of BMX bikes become shabby.

As pedals are the primary feature of any bicycle and are the most used component of the bike they could become worn out with lots of usage and can cause in creating annoying noise.

Solution: To fix this issue you need to replace the worn-out pedals with new ones.

9. Worn-out Tires:

The ninth common reason for BMX bikes to be noisy is that your overused tires become worn-out and create noise.

As you know BMX riders love to perform stunts and tricks with their bikes. They usually like jumping, flatland tricks, or offroad riding which can cause worn-out tires.

Solution: To fix this issue you need to replace your BMX bike’s worn-out tires with new ones after long use.

10. Loose or damaged spokes:

The tenth common reason for your BMX bike to be noisy is due to that your bike spokes may be damaged or loose.

The main purpose of the spokes is to hold the rim and provide support for your BMX bike tires. If the spokes on your BMX bike are loose or damaged then it will cause the bike to make a clicking or rattling noise. 

Solution: To fix this issue, you will need to tighten the loose spokes or replace the damaged spokes with new ones.

How can I make my BMX bike quiet?

As long as you apply all of the above-mentioned solutions to your BMX bike, you will be able to make it quieter.

Riding your BMX bike off-road, performing tricks on different obstacles, jumping, and all other stunts and tricks you did with your BMX bike. After that, you need to check your BMX bike parts regularly and fix the loose or damaged parts so that you can make your BMX bike quieter.

Always try to keep your chain lubricated it will help you keep your bike quieter and also can give you a smooth and fast ride.

Conclusion:

In conclusion, Your BMX bike is making noise depending on multiple reasons. There are riders who love to enjoy making their BMX bike noisy others may not want these annoying sounds.

Your BMX bike is noisy because either your bike components are loose which need to be tightened or parts became damaged that need to be replaced. 

There can be also Another factor that contributes to the unwanted sounds coming out of your BMX bike is the materials used in the manufacturing of the bike, the design of the wheels and tires, the type of pedals used, etc.

You can make your BMX bike quiet by regularly checking your bike parts, riders need to make sure that their bikes are quiet which will allow them for a smoother and more enjoyable ride.

 

FAQs:

1) Why does my BMX bike creak when I pedal?

Pedals, bottom brackets, and cranksets may make a creaking sound due to loose or worn components.

2) Why is my bike making a noise when I ride it?

When you start riding your BMX bike and it starts making noises it is due to mechanical reasons, such as worn brake pads or loose chains.

3) Are bikes supposed to make noise?

By law, bicycles are not supposed to make noise, but most BMX riders love to make noise from their bike and some want to avoid it. The sound that is created intentionally is the rider’s choice and unwanted sounds may be created due to mechanical reasons.

4) How do I stop my BMX crank from creaking?

You can keep your BMX bike crank from creaking by regularly maintaining your crank and keeping it clean. Try to lubricate the crank and tighten the crank bolts.

Leave a Reply